SANSI Dusk to Dawn Security Light with Motion Sensor, 27W 2700lm 5000K Daylight Outdoor IP65 Waterproof LED Floodlight with PIR Sensor, Black [Energy Class A+]
SALE PRICE: £35.99
- This fits your .
- by entering your model number.
- MOTION SENSOR: Auto-on when the motion is detected at night, auto-off after pre-determined time when no further motion is detected. Sensing light levels and motion are with a range of 180 degrees and up to MAX 50ft sensing range when being wall mounted at 8ft high
- SUPER BRIGHT: Adjustable ultra-bright dual-head produces up to 100 lumens/watt brightness with 6 LED bulbs. This Super Bright Outdoor Motion Sensor Light secures your home and illuminates your way home
- ELECTRICITY: 2700lm led security light is only rated at 27W, equivalents of 200W incandescent lights and 70W halogen floodlights, saving up to 87% on your electricity bill. Lower wattage and Higher brightness better meet your requirements
- HIGH QUALITY: Patented Ceramic Heat Dissipation Technology (CHDT), boosts lighting performance and cooling efficiency are greatly improved, giving it up to 50, 000 hours lifespan. This weatherproof light provides a sustainable and stable performance for outdoor use
- 5-YEAR WARRANTY: Welcome to contact us for any quality issue, we will serve you within 24hrs, you can choose a replacement or refund as you need
SANSI 27W PIR Motion Sensor LED Dusk to Dawn Security Light
Four Kinds of Working Modes:
1.Test Mode: Test Mode can work during daytime and night. Except Range, the Lux and Time Setting don’t work while using this mode.
2.Auto Motion Sensor Mode: Auto Mode only works at night. When it’s bright (>100-150 LUX) around the sensor, the light goes automatically back to Auto Mode.
3.On Time (on/off) Mode: On Time Mode can work during daytime and night. The Lux, Time and Range Setting don’t work while using this mode.
4.Dusk to Dawn Mode: D2D Mode only works at night. When it’s bright around the sensor, it goes off automatically. Except Lux, Time and Range don’t work while using this mode.
Three Setting Knobs:
1.Position 0 equals 3 Lux, Position ∞ equals max Lux and it’s always regard as night no matter how bright around the sensor.
2.Lux setting only works in Auto Mode and D2D Mode
1.Rotate the knob to adjust the sensing range to max ca. 50ft motion coverage.
2.When you mount the light over 7.8ft, please adjust the sensor upwards and set max range to increase the coverage area.
3.Range setting only works in Test Mode and Auto Mode.
1.Time knob is used for setting working time from 1-10 minutes when it detects motion.
2.Time setting only works in Auto Mode.
1.Make sure that there are no infrared or ambient lights pointing towards the motion sensor.
2.Make sure that there are no other influence factors affect the performance of light.
3.Be sure to disconnect the power before you install the light.
1 x SANSI LED Security Light
1 x Bar-shaped Mounting Plate
1 x Waterproof Gasket
3 x Screws
3 x Wire Connectors
First Available: 13 Dec. 2019
|Dimensions:||28.7 x 21.3 x 13.7 cm|