Electronic Wood Router 240V, TEENO 1200w Laminate Wood Working Joiners Tool, Compact Router with Trimmer Base…


Electronic Wood Router 240V

TEENO 1023 Variable Speed Workshop Router and Kitbox, 1200 W, 240 V, Red, Regular



Weight: 4.71 kg
Dimensions: 32.4 x 32.29 x 15.3 cm; 4.71 Kilograms
Manufacture: vanbox

You may also like...

14 Responses

  1. LashondHSW says:

     United Kingdom 🇬🇧

    Haven’t actually tried it yet but I am sure it will work fine.

  2. Anonymous says:

     United Kingdom

    Good router and good value for money…the case is not good though: the tools are too small for some of their clips so fall out easily, and you really have to cram everything in.

    Tool itself, I cannot fault.

  3. KatieIlxbbxh says:

     United Kingdom

    Never used a router before but after being given some offcuts of oak worktop I thought I could make use of I decided to buy this. It is very easy to use, and after a couple of practices on old timber decided to make a small table as seen in photo

    First time router user….very pleased

  4. ErrolGertrude says:

     United Kingdom

    2 cutting blades missing and a guide rod missing. No good.
    *Re-review* item replaced swiftly and all parts there and intact. Good job

  5. Anonymous says:

     United Kingdom 🇬🇧

    Very good router never used one before. The instructions weren’t very clear but managed to work it out. Once up and running it did the job that I wanted to do. Very ergonomic and once set up it is very accurate.

  6. Anonymous says:

     United Kingdom

    Very good router never used one before. The instructions weren’t very clear but managed to work it out. Once up and running it did the job that I wanted to do. Very ergonomic and once set up it is very accurate.

  7. Anonymous says:

     United Kingdom 🇬🇧

    Great price, for a person like me who likes pottering about great value for money.

  8. Anonymous says:

     United Kingdom

    Great price, for a person like me who likes pottering about great value for money.

  9. Anonymous says:

     United Kingdom 🇬🇧

    Golden Review Award: 9 From Our UsersThe router comes with many cutting bits and extras, and does a good job of cutting. I’ve tried a few of the bits and they seem to work. They router comes with many other attachments, including guides for following a guide and circle cutting. However one bit I used wore our quite fast with less than an hour continuous use. It may be possible to get higher quality bits.

    What let it down for me is the quality of the depth gauge. The calibration sticker fell off instantly, and later the whole thing fell apart. It’s hard to be accurate, for instance to plunge an extra 1mm is not easily possible with this gauge. Also when plunging, even using the depth gauge, it tends to plunge to different depths because of lack of accuracy in the devise. Which has been a difficult challenge resulting in low quality cuts.

  10. Seth Fiegerman says:

     United Kingdom

    Golden Review Award: 7 From Our UsersThe router comes with many cutting bits and extras, and does a good job of cutting. I’ve tried a few of the bits and they seem to work. They router comes with many other attachments, including guides for following a guide and circle cutting. However one bit I used wore our quite fast with less than an hour continuous use. It may be possible to get higher quality bits.

    What let it down for me is the quality of the depth gauge. The calibration sticker fell off instantly, and later the whole thing fell apart. It’s hard to be accurate, for instance to plunge an extra 1mm is not easily possible with this gauge. Also when plunging, even using the depth gauge, it tends to plunge to different depths because of lack of accuracy in the devise. Which has been a difficult challenge resulting in low quality cuts.

  11. Anonymous says:

     United Kingdom 🇬🇧

    Golden Review Award: 4 From Our UsersI only needed something to cut a small groove in the skirting board and this did the job well. I found I had to go over it a few times, cutting deeper each time. If I tried to cut in one go it didnt have the power and would stall. But it got there in the end!

  12. KobyDelgadillo says:

     United Kingdom

    Golden Review Award: 2 From Our UsersI only needed something to cut a small groove in the skirting board and this did the job well. I found I had to go over it a few times, cutting deeper each time. If I tried to cut in one go it didnt have the power and would stall. But it got there in the end!

  13. Anonymous says:

     United Kingdom 🇬🇧

    Not sure if the bits are to good or it maybe me.

  14. Anonymous says:

     United Kingdom

    Not sure if the bits are to good or it maybe me.

Leave a Reply

Your email address will not be published. Required fields are marked *