Creality 3D Printer Enclosure Fireproof and Dustproof Tent
Creality 3D Printer Enclosure Fireproof and Dustproof Tent for Ender 3 Max/ 5/5 Pro/5 Plus,CR-10/10S/10S PRO/10MINI,CR-X/CR-20/20PRO, Constant Temperature Protective Cover Room Storage 750X700x900mm
Compatibility
Small Size (445x565x685mm): Ender 3/Ender 3 Pro/Ender3 V2
Large Size (750X700x900mm): Ender 3 Max/Ender 5/Ender 5 Pro/ Ender 5 Plus/ CR-6 SE/CR-10 V3/CR-10 S Pro V2/ CR-X/CR-20/CR-20Pro
Customer Services
- Our after-sales technical team will provide you with detailed solutions within 24 hours.
- We will be devoted to producing high quality products & providing better service.
| Weight: | 3.47 kg |
| Size: | L |
| Dimensions: | 46.41 x 23.19 x 13.41 cm; 3.47 Kilograms |
| Part: | EU6-ZGZP-L |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Creality 3D |
| Dimensions: | 46.41 x 23.19 x 13.41 cm; 3.47 Kilograms |
| Reference: | EU6-ZGZP-L |
| Size: | L |
Sehr guter Kauf fr den 3D-Drucker! Es hilft, den Drucker sauberer zu halten, mit der Temperatur, Lrm. Montiert schnell und einfach, nicht wiegen und wenn Sie Katzen haben, sie nicht auf dem Drucker in Betrieb zu springen.
Exactly as described. Fits an ender 3 pro with a spool on top with some room to spare. Works great for me! Even made a little filament pass-though hole that I didn’t end up needing.
Things I printed always warped, no matter what. I bought new adhesion beds, extruded parts, the works. Nothing seemed to help until I got this. I can print with incredible precision now due to temperature control. Threaded nuts and bolts even. Very good for the price.
J’ai pris ce caisson pour une Ender 3 S1.
Simple monter, la qualit est l.
Utilis pour une impression en extrieur (demo lors d’un salon), l’imprimante etait bien protge des visiteurs, comme du vent.
Les ouvertures sur les cots en bas, permettent de faire sortir la chaleur.
Je ne regretta pas cet investissement.
I keep an Ender 3 S1 pro in here. It helps keep the temperature stable and keeps dust out. That is really what I wanted it for. There isn’t a lot of extra room but that’s fine. The material seems very strong and the frame is so-so but should hold up just fine. Great product.
I was using a double-thick cardboard box out in my garage for years before getting this enclosure. the cardboard box worked fine when it came to temperature stability but accessing the printer was a pain and also it didn’t seal at all.
this enclosure allows quick and easy access with the zipper and if you put in silica gel packets you can keep it dry inside the enclosure which is very important when printing PETG and PC
if you’re using an ender 3 and want to print exotic filaments like PC an enclosure like this is a must have.
Meine Anforderungen waren:
1. Der Drucker muss in das Gehuse passen
2. Bessere Druckqualitt durch gleichmige Umgebungsbedingungen
3. Keine Geruchsbelstigung (durch Drucker und Gehusematerial)
4. Einfache Montage und Demontage
5. Reduktion der Druckgerusche
6. Preis
7. Verbesserungen
Meine Erfahrungen:
1. Der Drucker muss in das Gehuse passen
Das Gehuse ist gro genug, damit der Drucker samt Filamentrolle hinein passt. An der Vorderseite gibt es ein groes Sichtfenster, dadurch lsst sich der Drucker whrend dem Druckvorgang beibachten. Die groe Klappe lsst sich mit einem Reisverschluss mit zwei Zippern schlieen.
An den Seiten und der Rckwand sind ffnungen, um Kabel heraus zu fhren. Diese sind per Klettverschluss zu schlieen.
Das Material ist aus einer Art Gummi-Kunststoff und macht einen wertigen Eindruck. Das Gestnge ist stabil und halt sehr gut. An der rechten Seite befinden sich drei kleine Taschen, in die man Werkzeug (Zange, Spatel, use.) unterbringen kann. Leider sind diese Taschen recht hoch, sodass das Werkzeug immer wieder mal komplett in der Tasche verschwindet.
Das Meterial ist schwer entflammbar, das habe ich (zum Glck) noch nicht getestet. Durch die Einhausung staubt der Drucker auch weniger ein. Alles in Allem bin ich mit der Verarbeitung sehr zufrieden.
2. Bessere Druckqualitt durch gleichmige Umgebungsbedingungen
Bisher drucke ich nur PLA / PLA+ von verschiedenen Herstellern.
Immer wieder hatte ich Probleme mit Luftzug und Luftfeuchtigkeit. Diese konnte ich mit dem Gehuse weitestgehend eliminieren. Die Oberflche wird deutlich glatter und gleichmiger. Der Unterschied war deutlich sprbar, als ich whrend des Drucks der Letzten Schicht die Klappe geffnet habe. Die Oberflche wurde deutlich rauher und ungleichmiger.
Der Innenraum heizt sich auf ber 10C mehr als die Umgebungstemperatur auf (gemessen am Boden). Entsprechend sinkt die relative Luftfeuchte auf 25-30% ab (mithilfe eines Kstchens mir Silicagel).
3. Keine Geruchsbelstigung (durch Drucker und Gehusematerial)
Da ich nur PLA drucke, ist mir noch keine Belstigung durch den Drucker aufgefallen.
Das Material der Hlle ist Gummi-artig und hatte beum Auspacken einen leichten Geruch, der aber nach eun paar Stunden verflogen war.
4. Einfache Montage und Demontage
Die Konstruktion hnelt einem Zeltaufbau. Die Anleitung ist gut bebildert. Wenn man strukturiert vorgeht, ist der Aufbau schnell erledigt.
Eine Demontage ist mglich, wurde von mir aber nicht durchgefhrt.
5. Reduktion der Druckgerusche
Leider hat das Gehuse keinen Effekt auf die Lautstrke des Druckers.
6. Preis
Mit etwa 50 bin ich mit dem Preis sehr zufrieden.
7. Verbesserungen
Im Innenraum habe ich ein Kstchen mir Silicagel, dadurch ist die Luftfeuchte kein Problem mehr und immer im niedrigen Bereich.
Zustzlich habe ich eine Set gnstiger LED- Streifen (<10) gekauft und im Innenraum befestigt, damit eine Gute Beleuchtung erreicht wird.
Der OktoPi ist mittels USB Kabel auerhalb des Gehuses untergebracht, da mir die Temperatur im inneren fr einen Dauerbetrieb zu hoch ist.
Fazit:
Das 3D Drucker Gehuse ist fr mich eine sinnvolle Investition, da es selbst bei PLA-Drucken ein paar Fehlerquellen minimiert. Das Preis-Leistungsverhltnis wrde ich aufgrund der sehr guten Verarbeitung und Materialqualitt mit Hervorragend einschtzen.
Perfect size for ender 3 V2 and great quality can’t complain!
Used for Ender3 v2 neo. Keeps the temp stable. Used in cold garage. No problems with printed results. Good quality.
This made a big difference in my prints. I haven’t had any print failures as without it i use to have warping on the build plate and failures due to change in temperature…i would highly recommend it.
Had trouble with failed prints in my house due to drafts and temperature fluctuations. This solved these but I did have to modify it for my printer. Should be OK with an Ender though.
Bought for an Ender 3 Neo and fits fine, tall enough to house a 1KG spool. Happy with purchase.
Does help with adhesion but mainly helps stop the dust in the air produced by the printer. Not sure what it was with my Ender 3 V2 but after few hours it always seemed to feel dusty in the air when in use, after all there is super fine partials produced by the printer. Now the printer is inside this enclosure it definitely feels better in the room. It has cut down the “feel” of the dust in the air/better air quality.
I also run an air purifier close to the enclosure to help also. A must if you have an Ender 3. Can’t give it 5 stars due to its size. It is quite big, it could have been slightly smaller, it’s also a dust magnet on the outside.
Will update this review further down the line.
For a small its big.
I have an ender 3 inside.
So easy to assemble and fit cover on.
Holds temp well i have a digital thermometer and its 36 most times.
Would recommend put a light in it as its dark to see inside.
Worth the price and good value.
Im happy with i
For me is the cheapest solution.
My Aquila x2 fitts well.
I bought this for my Ender 3v2. It was bigger than I expected but it should help with better prints. Easy to assemble once I worked out the cover alignment. The power lead aperture is on the wrong side but that’s no problem. There’s lots of room inside and although it looks quite chunky in the room, actually it’s not vastly bigger than the dimensions of the printer. It could do with being a tad shorter but it’s perfectly livable with. As a 3D printer enclosure it is excellent value and will fit many printers. I recommend it.
The enclosure was easy to assemble and has plenty of space for my ender 3 pro. I can finally print abs without warping and layer separation now with this enclosure!
I used with a Prusa Mk3. It is bigger than you actually need for such a printer, but it does mean that you have easy access for maintenance etc
The material is very odd, it’s almost sticky. The listing claims it is fireproof, I would be SHOCKED if that is true.
Easy to assemble and seems sturdy. Fits my Creality Ender 3 in it no problem. A useful pouch on the side and slot for allowing mains plug out as well. I recommend it even though it is a tad pricey.
The enclosure unit is expensive for what it does, also there are many issues with the seals on the unit I received resulting in having to tape it up. Overall I would probably do one in perspex next time to ensure the seal was better would recommend it for a beginner.
The enclosure unit is expensive for what it does, also there are many issues with the seals on the unit I received resulting in having to tape it up. Overall I would probably do one in perspex next time to ensure the seal was better would recommend it for a beginner.
Luckily I have the room for it and have built a dedicated table for it.
This is massive, but for me its worked out really well as My Ender 3V2 is heavily modified. and its given me the room inside the tent to accommodate all my mods, custom top mounted spool holder for direct drive, keyboard for octoprint my printers rarely off so its also allowed me to store all my PETG inside at 35’c 22% humidity, which is what my tent seems to levels out at when in use and zipped up.
The window takes a while for the creases to fall out, but they will making the window much easier to see through.
Its very easy to assemble, the quality of mine is very good, all stitching and zips are well constructed in the right places of corners.
It has created a stable temperature printing environment, has also helped me to prevent some corner lift/warping on large surface area, longer printing models as i print in PETG Nylon and CF filaments.
Luckily I have the room for it and have built a dedicated table for it.
This is massive, but for me its worked out really well as My Ender 3V2 is heavily modified. and its given me the room inside the tent to accommodate all my mods, custom top mounted spool holder for direct drive, keyboard for octoprint my printers rarely off so its also allowed me to store all my PETG inside at 35’c 22% humidity, which is what my tent seems to levels out at when in use and zipped up.
The window takes a while for the creases to fall out, but they will making the window much easier to see through.
Its very easy to assemble, the quality of mine is very good, all stitching and zips are well constructed in the right places of corners.
It has created a stable temperature printing environment, has also helped me to prevent some corner lift/warping on large surface area, longer printing models as i print in PETG Nylon and CF filaments.
I really like the enclosure, bought 2 now for my machines. I get better prints because the heat is contained and more consistent where my printers are in drafty garage.
It’s just a shame the opening flaps position is such that operating the printers controls is awkward. Would have been better to open up the front and not the side.
I really like the enclosure, bought 2 now for my machines. I get better prints because the heat is contained and more consistent where my printers are in drafty garage.
It’s just a shame the opening flaps position is such that operating the printers controls is awkward. Would have been better to open up the front and not the side.
Fits printer well with plenty of room for access and spool. Feels durable and good quality. Comparable to ones twice the price. Would recommend using side access flaps to pipe in ventilation for main board and power supply as it gets warm in there. Perfect for printing ASA/ABS or just keeping dust off the printer. Seems to cut out noise well, but is dark inside without some LED lights fitted to the printer (which is very easy to do).
I got the larger one because it said it would fit the max, etc, which has the same footprint as the CR10 Smart, so I figured it would fit a CR10 Smart… it does… kind of?
Physically, it will fit inside it, yeah – fine, but try actually using the bloody thing while it’s inside, because you will need patience and a buffer zone around the enclosure because stuff is going to be poking into the sides of the enclosure most of the time… it does the job though, keeps the warm air in a decent job of keeping the humidity low.
I got the larger one because it said it would fit the max, etc, which has the same footprint as the CR10 Smart, so I figured it would fit a CR10 Smart… it does… kind of?
Physically, it will fit inside it, yeah – fine, but try actually using the bloody thing while it’s inside, because you will need patience and a buffer zone around the enclosure because stuff is going to be poking into the sides of the enclosure most of the time… it does the job though, keeps the warm air in a decent job of keeping the humidity low.
I got the larger one because it said it would fit the max, etc, which has the same footprint as the CR10 Smart, so I figured it would fit a CR10 Smart… it does… kind of?
Physically, it will fit inside it, yeah – fine, but try actually using the bloody thing while it’s inside, because you will need patience and a buffer zone around the enclosure because stuff is going to be poking into the sides of the enclosure most of the time… it does the job though, keeps the warm air in a decent job of keeping the humidity low.
I got the larger one because it said it would fit the max, etc, which has the same footprint as the CR10 Smart, so I figured it would fit a CR10 Smart… it does… kind of?
Physically, it will fit inside it, yeah – fine, but try actually using the bloody thing while it’s inside, because you will need patience and a buffer zone around the enclosure because stuff is going to be poking into the sides of the enclosure most of the time… it does the job though, keeps the warm air in a decent job of keeping the humidity low.
Great produced if anything a little big but prints abs now with no problem at all
Great produced if anything a little big but prints abs now with no problem at all
As the nights get colder now, overnight prints are having delamination. Bought the kit to keep the heat in, and it works perfectly well. Improved print quality dramatically. The sound reduction isn’t massive, but it does make a noticeable difference.
As the nights get colder now, overnight prints are having delamination. Bought the kit to keep the heat in, and it works perfectly well. Improved print quality dramatically. The sound reduction isn’t massive, but it does make a noticeable difference.
I, like you, make things myself, hence we are printer owners. The temptation is therefore to build your own enclosure, however given I have limited time I decided to try this ready made one.
There isn’t much to fault. It goes together easily, is as sturdy as you’d expect and has openings in all the right places (this review is for the large version for a CR10S Pro). There’s even an outside pocket for all those tools you keep losing.
Be aware that (at time of writing) the picture on the Amazon site has the depth and width dimensions swapped – it’s 750 mm front to back, see the picture attached to this review.
I, like you, make things myself, hence we are printer owners. The temptation is therefore to build your own enclosure, however given I have limited time I decided to try this ready made one.
There isn’t much to fault. It goes together easily, is as sturdy as you’d expect and has openings in all the right places (this review is for the large version for a CR10S Pro). There’s even an outside pocket for all those tools you keep losing.
Be aware that (at time of writing) the picture on the Amazon site has the depth and width dimensions swapped – it’s 750 mm front to back, see the picture attached to this review.
I am an absolute noob in the 3D printing world so after reading tons of reviews, watch YouTube videos and scrutinise internet forums about this topic, I decided to buy this on specifically. I am amazed and fascinated. The assembly is fairly simple. Instructions are clear and concise. Literally, in 30 minutes since I opened the box I was printing that cat that comes in the SD. I am loving it. I totally recommend it.
I am an absolute noob in the 3D printing world so after reading tons of reviews, watch YouTube videos and scrutinise internet forums about this topic, I decided to buy this on specifically. I am amazed and fascinated. The assembly is fairly simple. Instructions are clear and concise. Literally, in 30 minutes since I opened the box I was printing that cat that comes in the SD. I am loving it. I totally recommend it.
Great product, perfect size and keeps the temperature just right while printing. Also has the peace of mind that it is fire resistant too
Great product, perfect size and keeps the temperature just right while printing. Also has the peace of mind that it is fire resistant too
Love this, added in some LED strip lights too. There could be a better fit for my ender 3 V2 but I guess its generic. Keeps heat in well and stops the room from getting unbearably hot.
Love this, added in some LED strip lights too. There could be a better fit for my ender 3 V2 but I guess its generic. Keeps heat in well and stops the room from getting unbearably hot.
Love this, added in some LED strip lights too. There could be a better fit for my ender 3 V2 but I guess its generic. Keeps heat in well and stops the room from getting unbearably hot.
Love this, added in some LED strip lights too. There could be a better fit for my ender 3 V2 but I guess its generic. Keeps heat in well and stops the room from getting unbearably hot.
Great quality product – I highly recommend.
However, please bear in mind that this is a fit-all enclosure. It is probably a bit large for my Ender 3 and also changing the filament is an access problem as there is no leftside opening. Other than these minor niggles a fine product.
Great quality product – I highly recommend.
However, please bear in mind that this is a fit-all enclosure. It is probably a bit large for my Ender 3 and also changing the filament is an access problem as there is no leftside opening. Other than these minor niggles a fine product.
Great product that has upped my print quality massively! After a few issues with shipping the seller was extremely helpful and got everything sort ASAP. Will defo buy from them again.
Great product that has upped my print quality massively! After a few issues with shipping the seller was extremely helpful and got everything sort ASAP. Will defo buy from them again.
Good size for my printer, keeps the temp constant and the cats and kids off the printer. Very pleased.
Good size for my printer, keeps the temp constant and the cats and kids off the printer. Very pleased.