30M High Pressure Washer Drain 3000 PSI/180bar Hose Cleaning
30M High Pressure Washer Drain 3000 PSI/180bar Hose Cleaning Kit Sewer Jetter Kit for Karcher K2-K7 Series & Bosch AQT Household Use Pressure Washe
From the brand
Garden supllies
| Weight: | 2.65 kg |
| Size: | 30m |
| Dimensions: | 28.6 x 28.4 x 13.2 cm; 2.65 Kilograms |
| Colour: | Blue |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | NAMOTEK |
| Dimensions: | 28.6 x 28.4 x 13.2 cm; 2.65 Kilograms |
| Size: | 30m |
Sadly it did not fit my particular pressure washer. Returned to Amazon. Thanks.
Just loved the spinning head, this propels itself forwards, with very little effort, great little tool.
I used the Karcher adapter which fits perfectly.
I cleaned out a ton of grease from a 2″ line under my kitchen. Price was right and works as advertised
The important thing is that this has saved me many hundreds of dollars in plumbing bills, so it was a very worthwhile purchase. My main gripe is that the end is quite large and rigid, so getting it around turns in pipes is difficult to impossible, depending on curvature. In our case, we have an older home without a separate clean-out, so we had to go in from under the sink. Once we got to the 90 degree junction between the roof vent and the sewer line, there was simply no way to get this thing down any further. We cleared out a huge amount of grease buildup in that short distance using this hose, and then got the rest in the sewer line with a heavy duty drain snake. Between those 2 things, we cleared out all our blockages and were able to resume use of our kitchen. It was a surprising amount of work, but when you look at what plumbers charge for jetting (and usually a lot extra for camera inspection), I’d say it was worth it. Then you end up with a useful tool in your arsenal for the future.
Easy to use . Admittedly only had a blockage of 3 metres but it did it easily . I’m a landlord and I am confident it will save me a few quid in the coming years .
I like this product! It cleared my daughter’s four inch sewer with grease pack inside. I save a lot of $. I recommend to every one to have one.
Does excactly what it was designed to do just keep in mind it’s not a one and done process given how badly the drains are compacted with silt mine were packed to the top and a few hours later and running the hose back and forth down the length of the drain and it was cleared.
The spinning head sure does a good job flushing back sludge.
should work well on a straight shot but i had a turn in a 2 inch pipe and it couldn’t do that .
Used in conjuction with my Wilks pressure washer utilising the 1/4 inch adapter. Used it to clean out blocked gutter down pipe from the bottom. Pressure pulled the hose up the pipe easily enough and did what I wanted it to do.
Perfect for such light occasional domestic use but I don’t think it would last long in a more arduous scenario due to its fairly light construction.
For the money I paid I’m more than happy.
Tips: You really must use the tape that comes with it. It’s in the instructions. Don’t skip this step. Make sure you know the minimum length that you need for your projects. I almost got a shorter jetter hose and now I am so glad I didn’t!
Bought this to clean out my downspouts. It was up to that task and could probably do a sewer cleanout, although the hose is rather rigid.
Cleared a few drains easily! Saved lots of $$ from having to call someone to do it. Just follow instructions… yes you need to use the plumbers tape that comes with it!
I thought I would give this a go rather than calling out a plumber. I used it to unblock an external sewer. I attached it to a pressure washer and stuck it down the pipe. It works really well. Not a nice job, but a big saving on calling someone out. It propels itself towards to blockage so not difficult to use.
A few tips. First, as people have mentioned, USE THE DAMN WHITE TAPE. A lot of the revires complained it leaked, and said they had to ‘add’ tape to get it to stop. Duh. Thats what the tape is for. ANY threaded plumbing connection needs tef tape. It isnt in the kit as an option, its required.
Next, also as mentioned. Roll it all the way out, and let it relax a little before feeding it. If you try to push it in without doing that, it wants to get tangled. Not the fault of the product, just the way it is.
Lastly, for those that couldnt get it to feed, I found that beyond 10 feet or so, it just didnt feed if you werent on the trigger. That was fine for me, because I was able to get it in far enough that I wouldnt be making any backblast come out of my drain. If your clog is close to where you’re feeding, you’re gonna get wet.
Overall, I would buy this again in a heartbeat. It already paid for itself in 1 use. I dont care if I never need it again. It IS fairly nicely built, so I’d be willing to bet it will last for a few more uses. I used it log enough to burn out 2 tanks of gas on my washer, so I’m more than happy with how sturdy it is
I have been trying to clear a blocked gutter downspout jammed above my third floor and inaccessible from the ground due to mountain slope and dangerous height. After two years of trying various drain snakes and other methods, this attached to my pressure washer and within a half hour the water flowed freely again. I could not find a contractor who wanted to deal with this but now I know what works. Just gorilla taped the hose with rotating back flow head to a large Husky drain cleaning flat metal snake and fed it up the downspout until it hit the blockage. It then burrowed into the blockage shooting water out behind and when I tugged it back out the sludge came with it. Worth every penny.
My kitchen drain had a five foot thick grease clog about 40 ft down the drain line. Chemicals and augers did nothing. The chemicals were diluted by the water and the auger just poked a hole in the clog that soon collasped. I hooked this to my gas pressure washer and it tore through the clog in 10 minutes. I ran it through four times for good measure. The sink now drains perfectly! I saved myself at least $900 from using a professional plumber. Money well spent!
So after buying a manky old house and then having a huge amount of building work done our drains we’re running a bit slow I rodded them and it was a little better for a few days, but then went slow again after a relative visited and used an obscene amount of toilet roll over a weekend (3 rolls in 2 day by one person!!!)
This fitted my Parker brand petrol jet wash, on the end of the Lance with the quick release attachment, easily and quickly and once I got the hose into the pooey hole (ohhh errr) the bullet tipped end blasted through the blockage with ease – TIP: pull it back and forth a few feet at a time and overlap the bit being cleaned.
The spiny end was just epic at cleaning out the drain . It blasted away the “toilet waste” with ease and then brought out huge pipe shaped chunks of fat / limescale and lots and lots of building debris!
It even sounds like those old whirllllllly horn things you get on ghost trains 😀
The drain is now spotless and running like new! And no need to ever call dyno-rod again as I’ve got my own kit now that’s as good as theirs
Just buy one and save yourself a fortune
Absolutely phenomenal product. Been dealing with a really badly clogged drainage system in my house. Was unable to run washing machine and could barely run my shower. Flooded my basement at least a dozen times. Finally bought this hydro-jet and it clean my system right out. Ran my washer and my basement is bone dry now. Cannot recommend this product enough. Buy this first before you pay for a plumber.
I hooked it up to a 2200psi gas pressure washer. It requires 2 people, one on pressure washer and one running the tip down the blocked pipe. Works good. You may need more hose depending on the location of the blocked pipe. Watch that the hose doesnt kink.